Specification : ASTM B637 / ASME SB637
Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Round Bars : Outside Diameter in the range of 15mm to 150mm
Bright Bars : Outside Diameter in the range of 15mm to 100mm
Hex Bars : 18mm - 57mm (11/16″ to 2-3/4″)
Square Bars : 18mm - 47mm (11/16″ to 1-3/4″)
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished
Length : 1 to 6 Meters, Custom Cut Lengths
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form : Round, Square, Hex (A/F), Rectangle Etc.
|
Grade |
Werkstoff |
UNS standard |
|
Nimonic 80A |
2.4631 |
N07080 |
|
Size |
Conditions |
Temperature range |
|
15NB - 150NB (inch) |
Cold Drawnd Polished Cold Drawn Centreless Ground & Polished. |
1050-1200°C (1920-2190°F) |
|
Finish |
Tolerance |
Dimensions |
|
Black Bright Polished NO.4 Finish Matt Finish Rough Turned BA Finish |
H8 H10 H9 H12 H11 K9 H13 K12 K11 K10 also as per customer’s requirements |
EN DIN JIS ASTM BS ASME AISI |
|
Types |
Applications |
Surface |
|
Rod Square bar Hex bar Forging Flat bar Forged bar Bright bar Ingot Rectangular bar Billet |
Chemical process Petrochemical Food processing Pulp & Paper Pollution control Refining |
Hot Rolled Pickled Cold Drawn Polished Sand Blasting Finished Bright Hairline |
|
Alloy 80A forged bar conforms to NACE MR0175/ISO 15156 |
||
Nimonic 80A foregd bar chemical composition
|
Alloy |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Co |
Al |
Ti |
Cu |
Fe |
|
Nimonic 80A |
≤0.10 |
≤1.00 |
≤1.00 |
≤0.020 |
≤0.015 |
18.0-21.0 |
Bal |
≤2.00 |
1.0-1.8 |
1.8-2.7 |
≤0.50 |
≤3.00 |
Mechanical Properties of Nimonic 80A / N07080 / 2.4631 Round Bars
|
Element |
Density |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
|
Nimonic 80A |
8.19 g/cm3 |
ksi – 181, MPa – 1250 |
ksi – 113, MPa – 780 |
30 % |
Markings On The Nimonic 80A Round Bar
The full identification of the bars should be continuously marked down its whole length, including :
Rating Designation
Material Designation
"WP" in grade symbol
Grade
Schedule number or nominal wall thickness
Heat Code
Manufacturer’s Name or Symbol
25th floor, C3 Building, Wanda Plaza, Kaifu District, Changsha, Hunan Province, China
en
ko
ru
es
ar
hi
